yamaha EXO8
The Yamaha EXo8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX Series processors via YDIF.
Yamaha EXo8 Specifications:
Maximum number of simultaneously usable devices: A total of seven EXi8 and EXo8 devices. (However in a system, a total of up to20 devices, including devices such as the MTX series and XMV series, can be used.)
Power cord length: 8.2ft
Included items: Power cord, Euroblock plugs (3-pin, tabbed) x 8, cable ties x 8, Owner’s manual
Sampling frequency: 48kHz/44.1kHz
Signal delay: Less than 2.5ms
Frequency response: 20Hz to 20kHz, -1.5dB min, 0dBtyp., +0.5dB max.
Total harmonic distortion: Less than 0.05% (+4dBu,Gain:-6dB); less than 0.1% (+4dBu, Gain:+66dB)
Dynamic range: 107dB (Gain:-6dB)
Equivalent input noise (EIN): -126dBu (Gain: +66dB)
Crosstalk / Channel separation: -100dB (@1kHz)
Maximum cable length: [YDIF] connector: 30 meters (Cable length between devices)
OUTPUT SIGNAL: GREEN -40dBFS
Format NETWORK connector: 100Base-TX
Cable specifications: [YDIF] connector: CAT5e or better Ethernet STP cable (Straight connected. All 8 pins must be connected.)
NETWORK connector: CAT5e or better Ethernet STP cable
Power supply voltage: US/Canada: 110V–240V 50/60Hz
Power consumption: 25 W max.
Heat dissipation (per hour): 21.5 kcal max.
Operating temperature range: 0 degrees Celsius – 40 degrees Celsius
Storage temperature range: -20 degrees Celsius – 60 degrees Celsius
NC value: 24 (1m from the front panel)
Dimensions: 18.9" W x 1.73" H x 13.8" D
Weight: 9.48 lbs
